Immersion engineer

Werkgever:
Koninklijke Bam | HK
Regio:
Gouda
 
Functieomschrijving
We are looking for an immersion Engineer for the 20km long Fehmarn Belt Tunnel Project (Danmark). As an immersion engineer, you will participate in the team responsible for floating up and/or hoisting the approx. 90 concrete tunnel elements, equipping them in the port and then transporting and installing them at sea. In a first phase you will participate in the preparation of this crucial operation, by making ballast plans e.g. In a second phase, you will be part of the operational team that does the immersion work, by going offshore and assist the Immersion Master by giving technical advice.Wat ga je doen
Immersion engineering is taking care of all calculations regarding:
  • Tunnel elements float up (weight analysis, determine ballast concrete and water, longitudinal section forces, floating stability)
  • Transfers in basins and harbour (winch operations with or without vessel assistance)
  • Mooring of the tunnel elements
  • Transport to offshore location
  • Immersion (including but not limited to dynamic analyses) 
  • And the stability of the elements after immersion.

This is what you are prepared to do in Denmark (full time or in 4-2 rotation).
  • You take part in the interface management with other departments within FLC regarding specific parts of the T&I scope
  • You will coordinate part of the design scope between Work Preparations and the design team based in the Netherlands
  • You ensure the conclusions and results from the design documents are correctly taken over in the work method statements, drawings and operation manuals for the Immersion Pontoon specific operations related to the overall transport and immersion scope
  • You liaise with the Marine Warranty Surveyor and contribute to the work procedures, Go/No Go procedures
  • During the execution phase, you advise during the transport and installation of the elements. You will be present in the command unit of the immersion pontoons during offshore operations. You will do checks during execution, monitor the immersion process, and have an advisory role to the one in charge of the operation. You are also prepared and ready to deal with contingencies if any might occur
  • After immersion, you will do checks on data to create lessons learned for next operations
Jouw werkomgeving
The construction of the Femern Belt Tunnel is one of Europe’s largest infrastructure projects of this decennium, and will become the world’s largest immersed tunnel. The combined road and rail tunnel connecting Denmark and Germany has a total length of 18km, is 9m high, has a width of 43m and will boost trade and tourism in Northern Europe. Almost every detail of this project has a size which is never seen before. Would you like to play a crucial role in the immersion process of the 90 elements, each with a length of 217meter?You’re located in Denmark. For your daily supervision you can rely on the project team in Denmark and on the design team from BAM Infraconsult based in The Netherlands. BAM Infraconsult is the Engineering Company of BAM Infra with 250 employees in several fields. The Maritime department (20 FTE) is a very experienced department with multiple senior advisors involved in several immersion tunnelling projects over the last decades. 
 Wij bieden jou
  • FLC considers transparent management structures, short decision-making channels, and a team-oriented environment to be extremely important. 
  • Our staff is expected to set themselves targets, achieve them independently, and take responsibility for their actions – irrespective of their position in the company. 
  • Based salary: € 5250,00 - €5750,00 gross per month, depending on age and experience
Hier herken jij jezelf in
  • You are a qualified civil engineer (expertise in hydrodynamics) or are a naval architect/maritime engineer with minimum of 7 years experience
  • You have prior experience with immersion of large structures or offshore lifting operations
  • You have a good understanding of stability calculations, mooring calculations and hydrodynamics
  • You are a hands-on problem solver, not afraid of taking decisions
  • You are a team player with strong communication skills
  • You find it a challenge to work in a very international, multi-cultural work-environment in which communication and team spirit is key to success
  • You are willing to work in Denmark, go offshore during immersion operations and willing to do STCW course
  • You are fluent in English.
Het recruitment proces
If you are interested in this position, please apply via the button on this page. For more information about this position, please contact Pleun Lok (Corporate Recruiter) via pleun.lok@bam.com or 06 50 16 68 70
 Kernwoorden